MacroSystem Casablanca / BogartSE / RelaxVision Support Forum

Citirano od "via email"

I recorded a show on a Panasonic 4K AG-UX180 camera with the record mode UHD 2160/59.94 @ 150M.I used the Bogart SE 12 & Arabesk V8 on a SAPHIR. Project format UHD3840x2160,16:9,60p. Total length of storyboard 40.54 min.It took 13hours 55 min to burn a Veratim 25 gb 16 x speed disc. It takes 20 minutes to burn 1 minute of footage. wow! The problem is playback. I tried it in a Sony UBP-X800M2 4K player. It said this operation is prohibited. I tried in the TRAVEL PRO, I had to open up the folder to stream & it played. Now the disc will not work @ all. I also burned on to a jump drive & it will play it on the sony USB port. If you could fix Arabesk & do something about the rendering speed, that would help.Thanks

In general, that player should be able to play Arabesk UHD-Disks. But there has been some negative feedback too: http://macromotion.info/uhd-disk

• I would recommend to try the lowest Arabesk quality setting
• If that won't help, export the project and re-import into a 3840x2160p30 project. Then, also players with (maybe) limited performance should work.
• If the menu is not shown at all, switch moving/still menu to see if the player likes that. Some play both - some just still or just moving...

Encoding time depends on the hardware I ask every customer if UHD disc or H.265 export is important or planned. If so, a nVidia graphic card would accelerate that dramatically: https://www.macromotion.info/grafikkarten-power

Hint: Most Verbatim BDs should only be burned with 2x speed with Nero, ImgBurn or other software that is capable of setting the speed. Windows (and therefore Arabesk) can't do that.

Note: My help in the forum is also supported by advertising, which is visible at this point for all forum members. Thank you for your understanding!